Our client, a leading machine manufacturer in the Concord area is currently seeking the following : CNC Lathe Setup Operator
MAJOR DUTIES :
- Setup and operate CNC Lathe machines.
- Setup the machine by using proper tools, and the most efficient technique.
- Align vises, fixtures with indicator to be parallel or square to a reference surface ie : table, fixture, vise etc.
- Indicate position of the fixture and parts.
- Set Lathe to correct position by using the right numeric code.
- Make dry run to check program for errors.
- Be able to change and modify a program.
- Change tool length and diameter offsets, fixture and pallet offsets.
- Be able to modify and grind cutting tools (end mills, drill, boring bars, form tools) if necessary, and use proper feed and speed for maximum efficiency.
- Check the first part and make sure that all the dimensions are within tolerance.
- Keep production running by deburring and preparing parts for loading into vise or fixture.
- Use time while machine runs as efficient as possible, for checking parts, cleaning up tools and tool holders from previous setup.
- If there are short running times, keep production going. by cleaning parts to load them again.
- Prepare tools and fixtures for the next job, get new tools, use regrind tools from the tool crib.
- Plan ahead when special tools are needed.
- Put tools into holders, clean holders, make sure tools are in good cutting condition.
- Check for damaged tool holders and tools (replace if necessary).
- Be able to use all the available measuring tools (like micrometer, dial gauges, deep micrometer, vernier, measuring block, height gauges).
- Be able to make layouts.
- Operate machine with proper guarding in place, report any damaged guarding, tool holders, tools etc.
- When big parts have to be changed ask for help if necessary.
- After setup is completed make sure guard for the tool drum will be put back in place.
- Check oil levels of machine and keep it in good condition.
- Protect self and others by following the company Health and Safety Policy and practicing safe work habits, industrial hygiene and good housekeeping around benches and machines.
Assistant CNC Operator (Co-op) - Day Shift
Reporting to the Supervisor of Metal Fabrication and working closely with the Team Leader and Metal Fabrication team, the CNC Operator for metal fabrication is responsible for setting up and performing basic maintenance of the CNC machine, following work orders to produce parts for our units accordi...
CNC Punch Programmer/Operator (afternoon shift)
We are seeking an experienced CNC Punch Programmer/Operator to join our production team. However, for the first three months on the job, the candidate must be able to work the day shift schedule. Train new employees on how to properly operate CNC Punch Machines and programs. Familiarity with RADAN o...
CNC Mill Setup Operator-Manufacturing
Our client, a leading machine manufacturer in the Concord area is currently seeking the following: CNC Mill Setup / Operator. Setup and operate CNC Mill machines. Setup the machine by using proper tools, and the most efficient technique. Use time while machine runs as efficient as possible, for chec...
Reach Forklift Operators in North York - Day Afternoon Shifts
We are looking for experienced Reach Forklift Operators to work at a warehouse facility in North York, ONTwo Shifts Available: - Days, 6:00am-3:00pm Monday-Friday, paying $20. Afternoons, 3:00pm-12:00am Monday-Friday (must be able to train on the day shift), paying $21. ...
Day shift - FABRICATION OPERATOR - Splicer/Dipper
Monday - Friday ( 7:00AM-3:00PM ). Encounters quality issues & machine faults which need to be reported to the Shift Supervisor . Interacts on a daily basis with Shift Supervisor, Lead Hand and Q. ...
CNC Mill Setup Operator-Manufacturing
Our client, a leading machine manufacturer in the Concord area is currently seeking the following: CNC Mill Setup / Operator. Setup and operate CNC Mill machines. Setup the machine by using proper tools, and the most efficient technique. Use time while machine runs as efficient as possible, for chec...
CNC Lathe Machinist (Afternoon Shift)
Shift: Afternoon Shift Available Monday to Thursday: between 4:00 pm to 2:30 am Training to be completed on day shift Monday to Friday 7:30am to 4:00pm MINIMUM QUALIFICATIONS: TECHNICAL KNOWLEDGE/EXPERIENCE: Post-Secondary education in General Machining, CNC Programming, or Mechan...
SMT Machine Operator (Day Shift)
This is a Day Shift position from Monday to Friday, shift starts at 8:00am till 4:30pm. Machine operator certification an asset. ...
Machine Operator (Fabrication) - Brake Press - Day Shift
Day shift is 40hrs/wk (Monday - Friday; 6:30am - 3 pm). Filling out production boards with output for the shift as well as assisting in planning afternoon shift production . Minimum 1-year experience as a CNC Machine Operator . Where do you come in? We are looking for a Brake Press Operator who has ...
SMT Operator (Tech Digital) - Day Shift
SMT Operator – 7:00 am – 3:30 pm Monday through Friday Responsibilities: Running SMT line equipment Machine/feeder setup Part taping and reeling Verifying board assembly prior to reflow Daily maintenance of SMT equipment Meeting Manufacturing and quality targets Compliance with all ...