Splicing is the production process utilizing heated moulds to join the ends of pre-cut rubber strips to form circular gaskets.
A shift : Monday - Friday ( 7 : 00AM-3 : 00PM )
Permanent and full time position
22,85$ / h + full benefits + RRSP from Day 1
PRINCIPLE ACCOUNTABILITIES
- Maintain working area is safe & clean before starting work
- Ensure mould temperature has reached its setting prior to splicing
- Perform tasks to prepare strip for splicing as required, e.g., dipping, sanding, heating, cleaning strip ends, etc.
- Verify rubber strip for straight cut and clean ends prior to splicing
- Load tape roll into tape machine and visually check quality
- Load gasket into press
- Insert splicing tape between the ends of gaskets (as required)
- Close mold; auto timer will open once cure time is up
- Remove gasket & remove flashing
- Visually inspect gasket for cracks at splice, nibs, lumps, pinholes, and other defects
- Inject silicone into gasket
- Break splice seal using pneumatic anvil
- Place the gasket on the silicone spreader & check for leaks
- Pack finished gaskets
- Verify the proper amount of gaskets are put into each box
- Document and record all required information
- Perform other duties as required by supervision to meet production requirements.
- Must be able to meet and maintain company quality and production requirements
- Adhere to company policies and procedures
KNOWLEDGE & SKILL REQUIREMENTS
- High school diploma is preferred
- Read write and speak basic English
- Must be able to use or can be trained on various types of measuring tools related to our gasket manufacturing process.
COMPLEXITY & JUDGEMENT
Encounters quality issues & machine faults which need to be reported to the Shift Supervisor
CONTACTS
- Interacts on a daily basis with Shift Supervisor, Lead Hand and Q.A. Inspector
- Occasional interaction with Production Manager, Operational Excellence Team, Health & Safety Manager, Plant Manager and other departments as required
WORKING CONDITIONS
Incumbent spends almost 100% of his / her time in the plant environment requiring varying degrees of light physical labour.
Lifting, pulling (less than 15 lbs.), standing and walking cover the majority of the work. Personal safety is affected by exposure to heat, and the use of light press equipment
- Incumbent understands respects and adheres to the workplace Health & Safety rules & regulations which are derived from the Occupational Health & Safety Act
Day shift - FABRICATION OPERATOR - Splicer/Dipper
Monday - Friday ( 7:00AM-3:00PM ). Encounters quality issues & machine faults which need to be reported to the Shift Supervisor . Interacts on a daily basis with Shift Supervisor, Lead Hand and Inspector. ...
Night shift - FABRICATION OPERATOR - Splicer/Dipper
Sunday - Thursday ( 11:00PM-7:00AM ). Encounters quality issues & machine faults which need to be reported to the Shift Supervisor . Interacts on a daily basis with Shift Supervisor, Lead Hand and Q. ...
Night shift - FABRICATION OPERATOR - Splicer/Dipper
Sunday - Thursday ( 11:00PM-7:00AM ). Encounters quality issues & machine faults which need to be reported to the Shift Supervisor . Interacts on a daily basis with Shift Supervisor, Lead Hand and Inspector. ...
Machine Operator (Fabrication) - Brake Press - Day Shift
Day shift is 40hrs/wk (Monday - Friday; 6:30am - 3 pm). Filling out production boards with output for the shift as well as assisting in planning afternoon shift production . Where do you come in? We are looking for a Brake Press Operator who has a passion for innovation and in their field of experti...
SMT Operator (Tech Digital) - Day Shift
SMT Operator – 7:00 am – 3:30 pm Monday through Friday Responsibilities: Running SMT line equipment Machine/feeder setup Part taping and reeling Verifying board assembly prior to reflow Daily maintenance of SMT equipment Meeting Manufacturing and quality targets Compliance with all ...
Assistant CNC Operator (Co-op) - Day Shift
Reporting to the Supervisor of Metal Fabrication and working closely with the Team Leader and Metal Fabrication team, the CNC Operator for metal fabrication is responsible for setting up and performing basic maintenance of the CNC machine, following work orders to produce parts for our units accordi...
SMT Machine Operator (Day Shift)
This is a Day Shift position from Monday to Friday, shift starts at 8:00am till 4:30pm. Machine operator certification an asset. ...
Reach Forklift Operators in North York - Day Afternoon Shifts
We are looking for experienced Reach Forklift Operators to work at a warehouse facility in North York, ONTwo Shifts Available: - Days, 6:00am-3:00pm Monday-Friday, paying $20. Afternoons, 3:00pm-12:00am Monday-Friday (must be able to train on the day shift), paying $21. ...
SMT Operator (Tech Digital) - Day Shift
Tech Digital is a manufacturer of audio and video infrastructure equipment for the television broadcast and film industry.Verifying board assembly prior to reflow.Daily maintenance of SMT equipment.Meeting Manufacturing and quality targets.Compliance with all Tech Digital Policies and Procedures.Mai...
CNC Operator (Machine Shop) - Intermediate (Day Shift)
Day shift is 40hrs/wk (Monday - Friday; 6:30am - 3pm),. Where do you come in? We are looking for a talented CNC Operator for the Day Shift and has a passion for innovation and in their field of expertise, enjoys working as part of a team and are committed to helping us become a leader in our industr...