Westlake offers you the potential to enrich your work life and career experience in an entrepreneurial environment. We work together to enhance peoples' lives through our products and presence in the communities in which we operate.
SUMMARY
This position supports a vinyl siding extrusion operation by leading the set-up process of tooling used to develop vinyl siding products.
Pay Rate : $26.83 / hr (zero to four years of service)
DUTIES AND RESPONSIBILITIES
- Ensure all tooling is ready for changeover.
- Provide support to machine operators and setup all changeovers (products / colours), PVC to ASA or ASA to PVC.
- Return tooling to maintenance department when changeover is complete. Add oil and check tooling to see if it needs any repairs.
Place tag if tooling needs repair.
Take initiative to see what improvements can be made to run extrusion line at all times. Highlight any issues with extrusion line and work with supervisor and lead hand to address the issue.
Investigates and resolves product or process problems related to tooling / changeover / set-ups.
- Identifies and develops process control improvement opportunities.
- Communicates effectively, which includes the ability to listen, follow instructions, identify and record problems, and make recommendations to correct discrepancies
- Must be able to work as a machine operator when short staffed.
- Be involved with operator training program,
- Comply with all company policies and procedures, including health and safety, as applicable.
- Perform other duties as required by Shift Supervisor.
EDUCATION, EXPERIENCE AND QUALIFICATIONS
- Set-Up Operator must demonstrate competence in the appropriate job category (i.e. machine operator, etc.) before being classified as a Set-Up Operator.
- Must be able to work 12 hour Continental shift
- Good communication skills.
- Team player, strong interpersonal skills.
Westlake is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any characteristics protected by applicable legislation.
If you are an active Westlake employee (or an employee of any Westlake affiliates), please do not apply here. You will apply via the Jobs Hub application in Workday.
Injection Moulding Set-up/Operator
Well-established plastics manufacturing company looking to hire an Injection Process/Set-up Technician who would be responsible for all facets of a 1-shift custom Injection molding department. Job Title: Injection Process/Set-up. Injection Molding Set-up: 5 years (preferred). ...
Jr. Rolling Mill Set Up Operator - Afternoons
Must have ability to follow written set-up instructions and fill out appropriate papers. Crane certificate would be an asset. Must have knowledge of setting roll tools and achieve section (training will be provided as needed). Must be organized and clean up the area and equipment at the end of the s...
CNC Set-up Operator
Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings. The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the followin...
Press Set-Up Operator - Afternoons
Ability to follow written set-up instructions and fill out proper set-up papers/maintain tool work order. Must be organized and clean up before and after set-up, including moping of the floor. Ensure that at all times prior to set–up, safety checklist is followed, completed and recorded. Must be abl...
Set-Up Operator
Provide support to machine operators and setup all changeovers (products/colours), PVC to ASA or ASA to PVC. This position supports a vinyl siding extrusion operation by leading the set-up process of tooling used to develop vinyl siding products. Set-Up Operator must demonstrate competence in the ap...
Rolling Mill Set-up Operator - Nights
Must have ability to follow written set-up instructions and fill out appropriate papers. Crane certificate would be an asset. Must have knowledge of setting roll tools and achieve section. Must be organized and clean up the area and equipment at the end of the shift . ...
CNC Set-up Operator
Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings. The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the followin...
Machinist Engineer Advisor (CNC)
As a Machinist Engineer Advisor (CNC), you will provide technical expertise and guidance in the field of machining and engineering, specifically focusing on Computer Numerical Control (CNC) machines. CNC Lathe Machine, CNC Vertical Milling Machine. Your knowledge and experience will be leveraged to ...
Forklift Operators - Weekends Only
Our client a leading distribution warehouse located in Brampton (Airport/Clark) is looking for a Forklift Operator with Reach, Walkie, Counterbalance and Order Picker certificate and experience to add to their team. ...
Counterbalance Forklift Operator
Are you an experienced forklift operator looking to take the next step in your career? If so, apply now! Our client, a growing transportation company in Brampton, is currently looking for a Counterbalance Forklift Operator. Minimum 5 years proven work experience as a forklift operator. Valid counter...